Landolt-Börnstein - Group VIII Advanced Materials and Technologies
Volume 6A3 2014

Polymers · Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers

Editors: K.-F Arndt, M. D. Lechner
ISBN: 978-3-642-55165-9 (Print) 978-3-642-55166-6 (Online)
DOI: 10.1007/978-3-642-55166-6

Table of contents (92 documents)

  1. Online Document 1

    List of Frequently Used Symbols

    C. Bierögel

  2. Online Document 2

    Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers · Abbreviations

    C. Bierögel

  3. Online Document 3

    Materials Symbols

    C. Bierögel

  4. Online Document 4

    Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers · General Remarks

    C. Bierögel

  5. Online Document 5

    Description of Properties

    R. Lach, W. Grellmann

  6. Online Document 6

    Coefficient of expansion - introduction

    V. -M. Archodoulaki, S. Seidler

  7. Online Document 7

    Coefficient of expansion - application

    V. -M. Archodoulaki, S. Seidler

  8. Online Document 8

    Coefficient of expansion - data

    V. -M. Archodoulaki, S. Seidler

  9. Online Document 9

    Viscoelastic Properties - introduction

    V. -M. Archodoulaki, S. Seidler

  10. Online Document 10

    Viscoelastic Properties - application

    V. -M. Archodoulaki, S. Seidler

  11. Online Document 11

    Viscoelastic Properties - data

    V. -M. Archodoulaki, S. Seidler

  12. Online Document 12

    Vicat softening temperature und heat distortion temperature - introduction

    I. Kotter, W. Grellmann

  13. Online Document 13

    Vicat softening temperature und heat distortion temperature - data

    I. Kotter, W. Grellmann

  14. Online Document 14

    Vicat softening temperature und heat distortion temperature - application

    I. Kotter, W. Grellmann

  15. Online Document 15

    Quasi-static tensile test - introduction

    C. Bierögel, W. Grellmann

  16. Online Document 16

    Quasi-static tensile test – tensile properties of thermoplastics - data

    C. Bierögel, W. Grellmann

  17. Online Document 17

    Quasi-static tensile test – tensile properties with yield point - application

    C. Bierögel, W. Grellmann

  18. Online Document 18

    Quasi-static tensile test - tensile properties without yield point - data

    C. Bierögel, W. Grellmann

  19. Online Document 19

    Quasi-static tensile test – application

    C. Bierögel, W. Grellmann

  20. Online Document 20

    Quasi-static tensile test – Poisson ratio of thermoplastic materials – data

    C. Bierögel, W. Grellmann

  21. Online Document 21

    Quasi-static tensile test – Poisson ratio - application

    C. Bierögel, W. Grellmann

  22. Online Document 22

    Tear Resistance - introduction

    K. Reincke, W. Grellmann

  23. Online Document 23

    Tear Resistance - data

    K. Reincke, W. Grellmann

  24. Online Document 24

    Tear Resistance- application

    K. Reincke, W. Grellmann

  25. Online Document 25

    Compression Loading - introduction

    C. Bierögel, W. Grellmann

  26. Online Document 26

    Compression Loading - data

    C. Bierögel, W. Grellmann

  27. Online Document 27

    Compression loading - application

    C. Bierögel, W. Grellmann

  28. Online Document 28

    Bend loading - introduction

    C. Bierögel, W. Grellmann

  29. Online Document 29

    Bend loading - data

    C. Bierögel, W. Grellmann

  30. Online Document 30

    Bend loading - application

    C. Bierögel, W. Grellmann

  31. Online Document 31

    Charpy impact strength - introduction

    B. Langer, W. Grellmann

  32. Online Document 32

    Charpy impact strength - data

    B. Langer, W. Grellmann

  33. Online Document 33

    Charpy impact strength - application

    B. Langer, W. Grellmann

  34. Online Document 34

    Izod impact strength - introduction

    B. Langer, W. Grellmann

  35. Online Document 35

    Izod impact strength of unfilled and reinforced materials according to ASTM D 256 - data

    B. Langer, W. Grellmann

  36. Online Document 36

    Izod impact strength of filled and reinforced materials according to ASTM D 256 – data

    B. Langer, W. Grellmann

  37. Online Document 37

    Izod impact strength of filled and reinforced materials according to ISO 180 – data

    B. Langer, W. Grellmann

  38. Online Document 38

    Izod impact strength - application

    B. Langer, W. Grellmann

  39. Online Document 39

    Dynstat impact strength - introduction

    B. Langer, W. Grellmann

  40. Online Document 40

    Dynstat impact strength - data

    B. Langer, W. Grellmann

  41. Online Document 41

    Impact failure energy - introduction

    K. Reincke, W. Grellmann

  42. Online Document 42

    Impact failure energy - data

    K. Reincke, W. Grellmann

  43. Online Document 43

    Impact failure energy - application

    K. Reincke, W. Grellmann

  44. Online Document 44

    Tensile impact toughness - introduction

    K. Reincke, W. Grellmann

  45. Online Document 45

    Tensile impact toughness - data

    K. Reincke, W. Grellmann

  46. Online Document 46

    Tensile-Impact Toughness of Elastomers - Application

    K. Reincke, W. Grellmann

  47. Online Document 47

    Fatigue Loading of Plastics - Introduction

    C. Bierögel, W. Grellmann

  48. Online Document 48

    Tensile Fatigue Loading of Thermoplastics – Data

    C. Bierögel, W. Grellmann

  49. Online Document 49

    Tensile Fatigue Loading of Thermoplastics - Application

    C. Bierögel, W. Grellmann

  50. Online Document 50

    Flexural Fatigue Loading - Introduction

    C. Bierögel, W. Grellmann

  51. Online Document 51

    Flexural Fatigue Loading - Data

    C. Bierögel, W. Grellmann

  52. Online Document 52

    Flexural Fatigue Strength - Application

    C. Bierögel, W. Grellmann

  53. Online Document 53

    Torsional Fatigue Strength – Application

    C. Bierögel, W. Grellmann

  54. Online Document 54

    Long-term Loading – Introduction

    C. Bierögel, W. Grellmann

  55. Online Document 55

    Long-term Loading – Tensile Creep Modulus - data

    C. Bierögel, W. Grellmann

  56. Online Document 56

    Long-term Loading – Tensile Creep Modulus - application

    C. Bierögel, W. Grellmann

  57. Online Document 57

    Long-term Loading – Flexural Creep Test - Introduction

    C. Bierögel, W. Grellmann

  58. Online Document 58

    Flexural creep modulus - data

    C. Bierögel, W. Grellmann

  59. Online Document 59

    Flexural creep modulus – application

    C. Bierögel, W. Grellmann

  60. Online Document 60

    Long-term loading – Compression Creep Test - Introduction

    C. Bierögel, W. Grellmann

  61. Online Document 61

    Compression creep modulus – data

    C. Bierögel, W. Grellmann

  62. Online Document 62

    Compression creep modulus – application

    C. Bierögel, W. Grellmann

  63. Online Document 63

    Stress Cracking Resistance – introduction

    R. Lach, W. Grellmann

  64. Online Document 64

    Stress Cracking Resistance (Constant Tensile Load) – data

    R. Lach, W. Grellmann

  65. Online Document 65

    Stress Cracking Resistance (Constant Tensile Load) – Application

    R. Lach, W. Grellmann

  66. Online Document 66

    Stress Cracking Resistance (Bent Strip Method) - Data

    R. Lach, W. Grellmann

  67. Online Document 67

    Stress Cracking Resistance (Ball Impression Test) - Application

    R. Lach, W. Grellmann

  68. Online Document 68

    Stress Cracking Resistance (Fracture Mechanic Method) - Data

    R. Lach, W. Grellmann

  69. Online Document 69

    Stress Cracking Resistance (Fracture Mechanic Method) - Application

    R. Lach, W. Grellmann

  70. Online Document 70

    Conventional Hardness Values - Introduction

    T. Koch, C. Bierögel, S. Seidler

  71. Online Document 71

    Conventional Hardness Values - Application

    T. Koch, C. Bierögel, S. Seidler

  72. Online Document 72

    Conventional Hardness Values - Data

    T. Koch, C. Bierögel, S. Seidler

  73. Online Document 73

    Instrumented Hardness Values – introduction

    T. Koch, S. Seidler

  74. Online Document 74

    Instrumented Hardness Values – data

    T. Koch, S. Seidler

  75. Online Document 75

    Quasi-Static Loading of Thermoplastics - Introduction

    R. Lach, W. Grellmann

  76. Online Document 76

    Quasi-Static Loading of Thermoplastics - Data

    R. Lach, W. Grellmann

  77. Online Document 77

    Impact Loading of Thermoplastics - Introduction

    B. Langer, W. Grellmann

  78. Online Document 78

    Impact Loading of Thermoplastics - Data

    B. Langer, W. Grellmann

  79. Online Document 79

    Quasi-Static Loading of Thermosets and High Performance Composites - Introduction

    R. Lach, W. Grellmann

  80. Online Document 80

    Quasi-Static Loading of Thermosets and High Performance Composites - Data I

    R. Lach, W. Grellmann

  81. Online Document 81

    Quasi-static loading – Energy determined Parameters - data

    R. Lach, W. Grellmann

  82. Online Document 82

    Quasi-Static Loading of Thermosets and High Performance Composites - Data III

    R. Lach, W. Grellmann

  83. Online Document 83

    Impact Loading of Thermosets and High Performance Composites - Data

    R. Lach, W. Grellmann

  84. Online Document 84

    Quasi-static loading of elastomers – introduction

    K. Reincke, W. Grellmann

  85. Online Document 85

    Quasi-static loading of elastomers – data

    K. Reincke, W. Grellmann

  86. Online Document 86

    Quasi-static loading of elastomers – application

    K. Reincke, W. Grellmann

  87. Online Document 87

    Impact Loading of elastomers – introduction

    K. Reincke, W. Grellmann

  88. Online Document 88

    Impact Loading of elastomers – data

    K. Reincke, W. Grellmann

  89. Online Document 89

    Impact Loading of elastomers – application

    K. Reincke, W. Grellmann

  90. Online Document 90

    Cyclic Loading of Elastomers – introduction

    K. Reincke, W. Grellmann

  91. Online Document 91

    Cyclic Loading of Elastomers – data

    K. Reincke, W. Grellmann

  92. Online Document 92

    Cyclic Loading of Elastomers - application

    K. Reincke, W. Grellmann