Landolt-Börnstein - Group III Condensed Matter

7.1.3.3.4.1 Fe alloys

Abstract

This chapter illustrates magnetic properties derived from the hysteresis loop of Fe alloys. Coercive field Hc, as a function of the annealing time ta and ternary diagram of the coercive field in the as-quenched state and after annealing state of Fe-B-Si alloy are illustrated. The curve for remanence-to-saturation ratio, and loss L and exciting power S at a peak induction of Fe-B-Si and Fe-B-Si-C alloys are shown. Loss L after annealing with, and without magnetic field as a function of applied stress for various Fe alloys are figured out. Further, pulse loss per half cycle as a function of the induction rate for Fe-B-Si, Fe-B-Si-C, Co-Fe-B-Si, Fe-Ni-B-Mo and Co-Fe-Ni-B-Si-Mo alloys is shown. Amplitude permeability versus magnetic field, and real part and imaginary part of the complex permeability as a function of frequency are demonstrated. In addition, coercive field for the alloys, Fe-B-Si and Fe-B-Si-C are shown. Hysteresis loss per cycle for Fe-B-Si-C is illustrated.

Cite this page

References (18)

About this content

Title
7.1.3.3.4.1 Fe alloys
Book Title
Magnetic Alloys for Technical Applications. Soft Magnetic Alloys, Invar and Elinvar Alloys
In
7.1.3.3.4 Properties derived from the hysteresis loop - Figures
Book DOI
10.1007/b91565
Chapter DOI
10.1007/10065028_43
Part of
Landolt-Börnstein - Group III Condensed Matter
Volume
19I1
Editors
  • H. P. J. Wijn
  • Authors
  • S. Roth
  • A. R. Ferchmin
  • S. Kobe
  • Cite this content

    Citation copied